Daewoo Excavator slewing bearing Installation and Maintenance Tips

November 18, 2026

A slewing bearing that is poorly prepared, unevenly bolted, or left without lubrication will not give you the service life you paid for, and the cost shows up as extra downtime on site. Many fleet owners also struggle to find a correct replacement for older Daewoo models, and then lose more time fitting it. If this sounds familiar, a properly installed and cared-for Daewoo Excavator slewing bearing rotates smoothly, protects the swing drive, and keeps your machine working through every shift. In this guide, Heng Guan Bearing shares practical steps for preparation, bolting, lubrication, and routine inspection, so your team can fit the bearing with confidence and enjoy a long service life. Read on to build a simple, reliable routine.

How to Prepare a Daewoo Excavator slewing bearing for Installation?

Prior to the bearing being removed from its carton, a good installation should begin. Compare the component with your machine model and drawings to verify outer and inner diameters, hole arrangement, and number of teeth. Heng Guan Bearing has a Daewoo Excavator slewing bearing for the entire DH and Solar series of excavators, from the lightweight DH55 to the heavy-duty Solar 470. Feel free to contact our experts with the machine plate number or images, and they will be happy to ensure that the bearing is the right one for your machine. As a result of adhering to OEM specifications for structural characteristics, load capacity, and mounting hole placements, all bearings are designed to be compatible with your machine without requiring any modifications.

Model SeriesSpecific Models
Mini ExcavatorsDH55, DH60, DH80, Solar 55, Solar 75
DH-5 / DH-7 SeriesDH130, DH150, DH215, DH220, DH225, DH258, DH280, DH300, DH320, DH330, DH370, DH420
Solar V / VII SeriesSolar 130LC, Solar 140LC, Solar 170LC, Solar 210, Solar 220, Solar 225, Solar 250, Solar 300, Solar 400, Solar 420, Solar 470

For a Daewoo Excavator slewing bearing, three structural configurations match different working conditions. The single-row four-point contact ball design suits light to medium-duty excavators with smooth rotation in compact dimensions. The single-row cross-roller design offers higher load capacity, rigidity, and precision for mid-range models. The three-row roller design is our heaviest-duty option for mining-grade excavators, with exceptional impact resistance and rollover stability. The table below summarizes the key technical parameters to check against your machine.

Technical Parameters

ParameterSpecification
Models coveredDaewoo / Doosan Daewoo DH and Solar series
Structure typesSingle-row four-point contact ball, single-row cross-roller, three-row roller
Base material50Mn and 42CrMo alloy steel, integral precision forging
Raceway hardeningMedium-frequency induction quenching, surface hardness HRC 55–62
Precision gradesP0, P6, P5, P4
Mounting compatibilityOEM-matched structural parameters, load capacity, and mounting hole positions
Quality testingCoordinate measuring machine inspection, vibration, life, and load testing
TraceabilityFull traceability from raw material to finished product

For reference, the table below shows two Daewoo part numbers and their key dimensions (all in mm).

Part NumberOuter DiameterInside DiameterTotal HeightOuter / Inner HolesTeeth
109-001591682131913844 / 44111
109-0016512029458436-Ф22 / 36-M2080

 

Daewoo Excavator slewing bearing

Next, clean the mounting faces on the upper frame and undercarriage, removing paint, rust, and debris so the surfaces are flat and smooth. Place the bearing carefully, keeping the marked soft zone away from the main load area, and use suitable lifting equipment to avoid knocks. A calm, tidy preparation sets up everything that follows.

What Should Be Checked Before Mounting and Tightening the Slewing Bearing Bolts?

Before the bolts go in, check that every thread is clean and every bolt matches the required strength grade. Light oil on the threads helps you reach consistent tension. Tighten the bolts in a cross pattern and increase the torque in several stages, rather than finishing one bolt at a time, so the bearing seats evenly on the frame. After the first period of operation, recheck the torque to confirm everything remains secure. For your Daewoo Excavator slewing bearing, always follow the tightening values supplied with your machine documentation. Installation guides come with every bearing, and our technical team can support you if you have questions. The table below summarizes the key steps.

StepActionBenefit
Bolt selectionUse the specified strength gradeReliable clamping force
Thread preparationClean and apply light oilConsistent tension
Tightening orderCross pattern, in stagesEven seating
Follow-up checkRetighten after initial runningLasting security

How to Lubricate a Daewoo Excavator slewing bearing Properly?

Lubrication is the simplest way to protect the raceways and gear teeth. Before operation, fill the grease channels with the specified lubricant and then turn the bearing a few times to spread the grease evenly over the raceways. Apply grease to gear teeth lightly and evenly. Clean old grease and dirt prior to applying new grease. Healthy seals keep contaminants out and the grease in, which is especially important where dust and mud are present, so keep them clean and properly seated. Using a consistent routine helps your Daewoo Excavator slewing bearing deliver smooth rotation day after day.

For a lubrication plan matched to your working conditions, email your machine model and site details to mia@hgb-bearing.com, and our technical team will happily advise you.

How Often Should You Inspect and Maintain an Excavator Slewing Bearing?

Regular checks on a Daewoo Excavator slewing bearing keep small details from becoming bigger jobs. Listen to the swing each day, glance at seals and grease, and review bolt tightness at scheduled services. Keep a short record of each inspection, so your team can see trends and plan maintenance during quiet periods. Use the schedule below as a starting point and adapt it to your own working conditions.

IntervalTask
DailyListen for smooth, quiet swing
WeeklyCheck seals and grease condition
Every serviceReview bolt torque and re-grease
SeasonalInspect gear teeth and mounting surfaces

Heng Guan Bearing offers installation guidance and engineering consultation, including support for bearing selection, load calculation and application analysis, as well as modified gear parameters and adapted mounting configurations for special applications. For discontinued early Daewoo models or non-standard equipment, our engineers can take 1:1 measurements from your existing bearing, or visit your site, and produce a replacement without original drawings. We hold a large inventory of classic Daewoo models: stock items typically dispatch within 7–15 days, while custom orders take 4–6 weeks. We produce slewing bearings from 20 to 10,000 mm, so we can help you build a routine and a supply plan that suit your fleet.

Conclusion

Careful preparation, correct bolting, regular lubrication, and scheduled inspection help a Daewoo Excavator slewing bearing perform smoothly for longer. Clean mounting faces, cross-pattern tightening in stages, re-torquing after initial running, even grease distribution, and daily attention to swing sound and seal condition all prevent small issues from becoming costly failures. Follow these habits, and your machine stays productive through every shift, with fewer unexpected stoppages and a swing drive that lasts. Heng Guan Bearing is ready to support you at every step, offering OEM-standard replacements for the complete DH and Solar series, forged 50Mn and 42CrMo rings with HRC 55–62 hardened raceways, full traceability, installation guidance, 1:1 measurement for discontinued models, and reliable stock or custom supply.

FAQ

Which Daewoo models do you cover?

We supply bearings for the complete DH and Solar series, from the DH55 to the Solar 470.

How do I confirm the right bearing?

Send your machine model number, plate number, or photographs to our engineers, and they will identify the right bearing.

How should I tighten the bolts?

Use a cross pattern and increase torque in stages, following the tightening values in your machine documentation.

How do I lubricate a new bearing?

Fill the grease channels, then rotate the bearing several times so the grease spreads evenly.

Do you offer installation support?

Yes. Installation guides are included, and technical support is available on request, including on-site measurement and reverse engineering where needed.

Can you supply bearings for discontinued Daewoo models?

Yes. We can custom-manufacture a replacement based on your existing bearing, without needing the original drawings.

Get Expert Support for Your Daewoo Excavator

Ready to install or replace your bearing? Heng Guan Bearing combines engineering expertise and manufacturing capability to deliver a Daewoo Excavator slewing bearing that fits and lasts:

  • OEM-standard replacements for the complete DH and Solar series
  • 50Mn / 42CrMo forged rings with HRC 55–62 hardened raceways
  • Full traceability, with CMM inspection plus vibration, life and load testing
  • Large stock inventory, 1:1 measurement and custom solutions for older models

Contact Heng Guan Bearing today for fast quotations, technical advice and dependable products. Email our team at mia@hgb-bearing.com with your machine model, and let us help your Daewoo excavator keep working.

References

1. Harris, T. A., & Kotzalas, M. N. (2006). Essential Concepts of Bearing Technology (5th ed.). CRC Press.

2. SKF Group. (2011). SKF Bearing Maintenance Handbook. SKF.

3. International Organization for Standardization. (2017). ISO 15243: Rolling bearings – Damage and failures – Terms, characteristics and causes. ISO.

4. Khonsari, M. M., & Booser, E. R. (2017). Applied Tribology: Bearing Design and Lubrication (3rd ed.). Wiley.

5. International Organization for Standardization. (2013). ISO 898-1: Mechanical properties of fasteners made of carbon steel and alloy steel – Bolts, screws and studs. ISO.

6. Verein Deutscher Ingenieure. (2015). VDI 2230: Systematic calculation of high-duty bolted joints. VDI.

GET IN TOUCH WITH OUR ENGINEERS
Tell us your requirements — drawings, size, or application