banner

XU300515 Crossed Roller Slewing Ring

XU300515 is the largest and heaviest gearless crossed roller slewing ring in the INA XU standard series — the flagship heavy-duty model with the highest load capacity in the family.
• Dimensions: Bore 384 mm (15.12 in), OD 646 mm (25.43 in), height 86 mm (3.39 in), weight 114.8 kg (253 lb)
• Load Ratings: Dynamic axial Ca = 650 kN, static axial C0a = 1,300 kN (highest in XU family); dynamic radial Cr = 460 kN, static radial C0r = 640 kN; max screw load Fr zul = 313.2 kN
• Preload System: VSP 0-0.03 mm — zero clearance, no backlash with maximum tilting stiffness for large-diameter precision turntables
• Structure: Crossed roller X-arrangement (single row, gearless) — 30 mm class rollers, largest in the XU family for maximum line-contact load capacity
• Mounting: 18 x 26 mm through holes on both 598 mm outer / 432 mm inner bolt circles
• Sealing & Lubrication: Sealed both sides; grease via nipple on outer ring; operating range -30 to +80 C
• Remanufacturable: Officially marked on Schaeffler medias page — worn units can be reconditioned (raceway regrind, roller/cage/seal replacement, preload restoration) at 40-60% of new-unit cost
• Drive Method: External pinion, chain/belt, friction wheel, or direct motor coupling (no gear teeth)
• Interchange: Direct replacement for INA XU300515 / XU 30 0515
Send Inquiry Download
  • Product Description

XU300515 Crossed Roller Slewing Ring – Gearless, 384 × 646 × 86 mm

Heavy turntables need a bearing that holds its position under combined axial, radial and tilting loads. The XU300515 Crossed Roller Slewing Ring is a gearless, single-row ring with a 384 mm bore, 646 mm outside diameter and 86 mm height. It uses VSP preload of 0–0.03 mm for zero clearance and is sealed on both sides. Luoyang Heng Guan Bearing Technology Co., Ltd. supplies it with a minimum order of 1 pc, and engineering confirmation takes 24 hours. Check the full data and load ratings below against your flange drawing before ordering.

XU300515 Crossed Roller Slewing Ring Specifications

Values are shown in metric and imperial units. Please check them against your flange drawing.

Parameter
Value
Bearing type
Crossed roller (X-arrangement), single row, gearless
Bore diameter (di)
384 mm (15.12 in)
Outside diameter (Da)
646 mm (25.43 in)
Total height (H)
86 mm (3.39 in)
Outer ring inner diameter (Di)
516 mm (20.31 in)
Outer ring height (ha)
79 mm (3.11 in)
Weight
114.8 kg (253 lb)
Outer bolt circle (La)
598 mm (23.54 in), 18 holes
Inner bolt circle (Li)
432 mm (17.01 in), 18 holes
Fixing bores
18 × Ø26 mm through holes, both rings
Roller diameter
30 mm class (XU 30-class)
Preload
VSP 0–0.03 mm (zero clearance)
Seals / lubrication
Sealed both sides / nipple on outer ring
Operating temperature
-30 to +80 °C
Precision
P0 / P6 / P5
Material
50Mn/42CrMo4 rings, GCr15 rollers
Remanufacturable
Yes
Interchange
INA XU300515 / XU 30 0515
HS code
8482.10 / 8482.99

Load Ratings

Rating
Value
Note
Axial load rating Ca
650 kN (146,126 lbf)
Rating-life basis
Static axial load C0a
1,300 kN (292,252 lbf)
–
Radial load rating Cr
460 kN (103,412 lbf)
Radial load only
Static radial load C0r
640 kN (143,877 lbf)
Radial load only
Max. radial load on fixing screws (Fr zul)
313.2 kN (70,411 lbf)
–

Parameters not listed above, such as grease type or tolerance details, are not stated in our current product data. Ask us and we will confirm them before you order.

Structure and Materials

In the XU300515 Crossed Roller Slewing Ring, cylindrical rollers cross at 90° in V-shaped raceways. This X arrangement creates line contact, so a single ring can carry radial, axial and tilting moment loads together. A spacer or cage guides the rollers, which helps limit skewing and friction.

The rings are made of 50Mn/42CrMo4 steel and the rollers of GCr15. Because of line contact, a crossed roller ring generally offers higher rigidity in a thinner section than a four-point contact ball ring, which relies on point contact.

Both sides are sealed to retain grease and keep contamination out. Grease is added through the nipple on the outer ring.

XU300515 Crossed Roller Slewing Ring

Preload and Load Selection

The ring is supplied with VSP preload of 0–0.03 mm, which gives zero clearance. Compare the static axial and radial ratings and the fixing screw limit with your calculated load case, including tilting moment, before selecting the size.

Mounting and Drive Options

Both rings have 18 × Ø26 mm through holes, on a 598 mm outer bolt circle and a 432 mm inner bolt circle. The maximum radial load on the fixing screws is listed as 313.2 kN.

The product has no gear teeth, so the turntable needs an external drive. Options include a pinion on a gear ring or rack, a chain or belt, a friction wheel, or a hydraulic or electric motor coupled to the table. Our team can advise on installation, preload adjustment and lubrication.

The interchange reference is INA XU300515 / XU 30 0515. INA is a third-party trademark used only to describe compatibility. Please verify dimensions and bolt patterns against your drawing before replacing an existing bearing.

Typical Applications

Customers can consider the XU300515 Crossed Roller Slewing Ring for large turntables such as:

· Heavy rotary and indexing tables

· Wind and energy test rigs, including gearbox stands and dynamometer platforms

· Marine and port excavator, where surface treatment should be confirmed for the environment

· Construction excavator, such as excavator platforms

· Medical imaging gantries

· Antenna, radar and other test turntables

Suitability depends on your load case, speed, environment and drive. Our engineers can review these with you.

XU300515 Crossed Roller Slewing Ring application

Remanufacturing

XU300515 is listed as remanufacturable. For a worn unit that is suitable, the work can include raceway regrinding, replacement of rollers, cage and seals, and preload restoration. Scope and cost are confirmed after inspection.

Quality and Manufacturing

Luoyang Heng Guan Bearing Technology Co., Ltd. works under an ISO 9001:2015 quality system, with more than 20 years of experience and a team of more than 50 people. Inspection equipment includes coordinate measuring machines, vibration testers and life testing machines. Machining and heat treatment use CNC vertical lathes, CNC quenching machines, machining centers, grinding machines and large gear hobbing machines.

If your project needs specific checks, such as mounting hole positions, runout, preload or seal contact, tell us when you inquire.

XU300515 Crossed Roller Slewing Ring certification

Ordering and Support

To order the product, send your application, load data, quantity and flange drawing. The minimum order is 1 pc. After engineering confirmation, which takes 24 hours, we send the CAD drawing and pricing.

If you need a different size, we cover bearings from 50 to 10,000 mm, OEM/ODM work, and non-standard machining for large gears, Shafts, ring gears and couplings. Old products can be mapped without 3D drawings.

After-sales replies come within 24 hours. We ship to more than 50 countries, including the United States, Germany, Turkey, Australia and the Middle East.

FAQ

Q: Does XU300515 include gear teeth?

A: No. It is gearless, so you need an external drive such as a pinion, chain, belt, friction wheel or motor.

Q: Is XU300515 preloaded?

A: Yes. VSP preload of 0–0.03 mm gives zero clearance.

Q: Can I replace an INA XU300515 with this ring?

A: The interchange reference is INA XU300515 / XU 30 0515. Please verify dimensions and bolt patterns against your drawing first.

Q: Can a worn unit be remanufactured?

A: XU300515 is listed as remanufacturable. We confirm the scope after inspecting the unit.

Q: Is XU300515 in stock?

A: Stock status is not listed on this page. Send your quantity and required date, and we will confirm availability.

Contact Us

Send your drawing, quantity and load data to mia@hgb-bearing.com. We will confirm availability, CAD drawing and pricing for the XU300515 Crossed Roller Slewing Ring.

GET IN TOUCH WITH OUR ENGINEERS
Tell us your requirements — drawings, size, or application