XU160260 Crossed Roller Slewing Ring
• Dimensions: Bore 191 mm (7.52 in), OD 329 mm (12.95 in), height 46 mm (1.81 in), weight 15.4 kg (34.0 lb)
• Load Ratings: Dynamic axial Ca = 198 kN, static axial C0a = 405 kN (highest in 12/16 band); dynamic radial Cr = 141 kN, static radial C0r = 199 kN
• Preload System: VSP 0-0.02 mm — zero clearance, no backlash for precision positioning under heavy loads
• Structure: Crossed roller X-arrangement (single row, gearless) — 16 mm class rollers for maximum line-contact rigidity
• Mounting: 20 x 14 mm through holes on both 305 mm outer / 215 mm inner bolt circles
• Sealing & Lubrication: Sealed both sides; grease via nipple on outer ring (protrusion umax 3.5 mm); operating range -30 to +80 C
• Variant: XU160260-ZT centring variant available — di ZT 193 mm (IT8) / Da ZT 327 mm (-IT8) for accurate assembly location (weight 15.2 kg, Fr zul 78.0 kN)
• Drive Method: External pinion, chain/belt, friction wheel, or direct motor coupling (no gear teeth)
• Interchange: Direct replacement for INA XU160260 / XU 16 0260
- Product Description
XU160260 Crossed Roller Slewing Ring: Sealed, Preloaded Gearless Ring for Compact Precision Rotation
Luoyang Heng Guan Bearing Technology Co., Ltd. offers the sealed, preloaded XU160260 Crossed Roller Slewing Ring, a gearless ring from the INA XU standard series for compact rotary equipment. It has a 191 mm bore, a 329 mm outside diameter and a 46 mm height, with a listed weight of 15.4 kg. Static load ratings are C0a 405 kN axial and C0r 199 kN radial, and VSP preload is 0–0.02 mm. The page below lists the mounting dimensions, materials, precision grades and drive options so engineers can check fit before requesting a drawing or quotation.
Key Features
· Crossed roller design with a single row of rollers in an X arrangement, intended to carry radial, axial and moment loads in one ring.
· VSP preload of 0–0.02 mm to reduce internal clearance.
· Rollers in the 16 mm class give line contact inside the 46 mm overall height, which suits flat turntable and joint designs.
· 20 through holes of 14 mm on each bolt circle for fixing the outer and inner rings.
· Seals on both sides and a grease nipple on the outer ring for re-lubrication.
· Gearless ring that can be driven by an external pinion, rack, chain, belt, friction wheel or motor.
· MOQ 1 pc.
XU160260 Crossed Roller Slewing Ring Specifications
Parameter | Value |
Bearing type | Crossed roller, X-arrangement, single row, gearless |
Bore diameter (di) | 191 mm (7.52 in) |
Outside diameter (Da) | 329 mm (12.95 in) |
Total height (H) | 46 mm (1.81 in) |
Weight | 15.4 kg (34.0 lb) |
Outer ring inner diameter (Di) | 261 mm (10.28 in) |
Outer ring height (ha) | 41 mm (1.61 in) |
Outer bolt circle (La) | 305 mm (12.01 in), 20 holes |
Inner bolt circle (Li) | 215 mm (8.46 in), 20 holes |
Fixing bores | 20 × 14 mm through holes, both rings |
Roller diameter | 16 mm class |
Axial load rating Ca | 198 kN (44,512 lbf) |
Static axial load C0a | 405 kN (91,048 lbf) |
Radial load rating Cr | 141 kN (31,698 lbf) |
Static radial load C0r | 199 kN (44,737 lbf) |
Max screw load Fr zul | 82.6 kN (18,569 lbf), base model |
Preload | VSP 0–0.02 mm |
Seals | Both sides |
Lubrication | Nipple on outer ring, umax 3.5 mm |
Operating temperature | -30 to +80 °C |
Precision | P0/P6/P5 |
Material | 50Mn/42CrMo4 rings, GCr15 rollers |
Variant | XU160260-ZT |
Interchange | INA XU160260 / XU 16 0260 |
HS code | 8482.80.00 |
Values are listed as supplied in the product data. Parameters not shown in the table, such as moment load capacity or speed limits, have not been provided and are not stated here.
Load Ratings and Preload
The XU160260 Crossed Roller Slewing Ring is listed with static ratings of C0a 405 kN (axial) and C0r 199 kN (radial), and load ratings of Ca 198 kN and Cr 141 kN. The maximum screw load Fr zul is 82.6 kN for the base model.
These are catalog values. Check them against your actual axial, radial and moment loads and your own safety factor before selecting the ring. Moment load data is not included in the supplied specifications, so Contact Us if your design depends on it.
VSP preload of 0–0.02 mm is intended to reduce internal clearance, which matters for rotary tables and joints that see changing load directions.
Crossed Roller Design, Materials and Precision
In a crossed roller ring, cylindrical rollers sit at 90° to each other in a V-shaped raceway. A single ring can therefore take radial, axial and moment loads together, and line contact between roller and raceway supports a compact section. In tight spaces, this can reduce the need for two separate bearings.
The product uses 50Mn/42CrMo4 rings and GCr15 rollers. Precision grades P0, P6, P5 and P4 are listed, so please state the grade you need when requesting a quotation.

Mounting, Sealing and Drive Options
Fix the ring with 20 × Ø14 mm holes on the 305 mm outer bolt circle and 20 × Ø14 mm holes on the 215 mm inner bolt circle. Seals on both sides help protect the raceway, and the outer-ring nipple allows re-lubrication. The specification table lists umax 3.5 mm for the nipple. The listed operating temperature is -30 to +80 °C.
The ring has no gear teeth. It can be driven by a pinion on a customer gear ring or rack, a chain or belt, a friction wheel, or a hydraulic or electric motor coupled to the turntable.
A centring variant, XU160260-ZT, is also listed. Ask for its drawing to confirm the centring diameters, weight and screw load before ordering.
Typical Applications
The XU160260 Crossed Roller Slewing Ring is suited to compact equipment where a preloaded, sealed, gearless ring is needed. Typical uses to evaluate include:
· Rotary indexing tables and machine tool rotary tables
· Robot joints and heavy actuators
· CT and imaging gantries
· Measuring instruments, such as CMM rotary tables and optical turntables
· Welding positioners and special excavator, such as coating machines, filling machines and antenna turntables
Suitability depends on your load case, speed, mounting stiffness and required precision grade.

Quality Control and Testing
Production follows an ISO 9001:2015 quality system. Inspection equipment includes coordinate measuring machines for hole positions, diameters and heights, plus vibration testers and life testing machines. Contact us to confirm which inspection records are available for your order.
Factory Supply and Technical Support
Heng Guan reports over 20 years of bearing experience and a team of over 50 people. Its equipment includes CNC vertical lathes, CNC quenching machines, machining centers and grinding machines. The company can map old products without 3D drawings and offers OEM/ODM and non-standard parts.
Technical staff can advise on installation, preload adjustment and lubrication, and aim to reply within 24 hours.

FAQ
Q: What is XU160260?
A: The product is a sealed, VSP-preloaded, gearless ring from the INA XU standard series. It has a 191 mm bore, a 329 mm outside diameter and a 46 mm height, and weighs 15.4 kg.
Q: What are the mounting dimensions?
A: The outer bolt circle is 305 mm and the inner bolt circle is 215 mm. Each has 20 holes, and the fixing bores are 20 × 14 mm through holes on both rings.
Q: What are the load ratings?
A: Axial Ca is 198 kN and static axial C0a is 405 kN. Radial Cr is 141 kN and static radial C0r is 199 kN. The maximum screw load Fr zul is 82.6 kN for the base model.
Q: Is XU160260 preloaded?
A: Yes. The specification lists VSP preload of 0–0.02 mm.
Q: What is the difference between XU160260 and XU160260-ZT?
A: XU160260-ZT is listed as a variant of the base model. Request its drawing to confirm the centring features, weight and screw load.
Q: Is XU160260 interchangeable with INA bearings?
A: XU160260, also written XU 16 0260, is the INA designation listed as the interchange reference. Compare the drawing dimensions before replacing an existing INA unit. INA is a third-party trademark used only to describe compatibility.
Contact Us
Send your application details or drawing to mia@hgb-bearing.com to request availability, a CAD drawing or a quotation for the XU160260 Crossed Roller Slewing Ring.




