banner

XU120179 Crossed Roller Slewing Ring

XU120179 is a sealed, VSP-preloaded gearless crossed roller slewing ring from the INA XU standard series — a P1 priority model for precision machine tool rotary tables.
• Dimensions: Bore 124.5 mm (4.90 in), OD 234 mm (9.21 in), height 35 mm (1.38 in), weight 6.36 kg (14.0 lb)
• Load Ratings: Dynamic axial Ca = 105 kN, static axial C0a = 194 kN; dynamic radial Cr = 75 kN, static radial C0r = 95 kN
• Preload System: VSP max 0.02 mm — zero clearance, no backlash for precision indexing and servo-driven axes
• Structure: Crossed roller X-arrangement (single row, gearless) — 12 mm rollers in 90-degree crossed pattern for maximum rigidity in compact 35 mm section
• Mounting: 12 x 11 mm through holes on both 214 mm outer / 144.5 mm inner bolt circles
• Sealing & Lubrication: Sealed both sides; grease via nipple on outer ring (protrusion umax 6 mm — largest in XU family, reserve housing space); operating range -30 to +80 C
• Market Demand: Active buyer demand proven by MISUMI Europe listing and competitor dedicated pages
• Drive Method: External pinion, chain/belt, friction wheel, or direct motor coupling (no gear teeth)
• Interchange: Direct replacement for INA XU120179 / XU 12 0179
Send Inquiry Download
  • Product Description

XU120179 Crossed Roller Slewing Ring: Sealed, VSP-Preloaded Gearless Bearing

Engineers who need a compact, gearless bearing for a precision rotary table may want to consider the XU120179 Crossed Roller Slewing Ring from Luoyang Heng Guan Bearing Technology Co., Ltd. It is a sealed ring from the INA XU standard series, with a VSP preload of max 0.02 mm (zero clearance). The bore is 124.5 mm, the outside diameter is 234 mm, the height is 35 mm, and the weight is 6.358 kg. Axial load rating Ca is 105 kN and static axial rating C0a is 194 kN. Minimum order quantity is 1 piece.

XU120179 Crossed Roller Slewing Ring Overview

XU120179 is a single-row, gearless crossed roller ring in an X-arrangement. Inside, 12 mm cylindrical rollers cross at 90 degrees between the rings. Line contact lets one ring carry axial, radial and tilting loads together, so in some compact designs it may replace a two-bearing arrangement.

According to the specification table, the rings are made of 50Mn/42CrMo4 steel and the rollers of GCr15. Precision grades are P0, P6 and P5.

XU120179 Crossed Roller Slewing Ring Specifications

Check these figures against your housing and drive design.

Parameter
Value
Bearing type
Crossed roller (X-arrangement), single row, gearless
Bore diameter (di)
124.5 mm (4.90 in), ±0.5
Outside diameter (Da)
234 mm (9.21 in), ±0.5
Total height (H)
35 mm (1.38 in)
Weight
6.358 kg (14.0 lb)
Inner diameter, outer ring (Di)
180 mm (7.09 in)
Outer ring height (ha)
30 mm (1.18 in)
Axial load rating (Ca)
105 kN (23,605 lbf)
Static axial rating (C0a)
194 kN (43,614 lbf)
Radial load rating (Cr)
75 kN (16,861 lbf)
Static radial rating (C0r)
95 kN (21,357 lbf)
Max screw load (Fr zul)
33.6 kN (7,554 lbf)
Preload
VSP max 0.02 mm (zero clearance)
Seals
Sealed both sides
Lubrication
Nipple on outer ring, protrusion umax 6 mm
Outer bolt circle (La)
214 mm (8.43 in), 12 holes
Inner bolt circle (Li)
144.5 mm (5.69 in), 12 holes
Fixing bores
12 × 11 mm through holes, both rings
Roller diameter
12 mm (XU 12-class)
Operating temperature
-30 to +80 °C
Interchange
INA XU120179 / XU 12 0179
Precision
P0/P6/P5
Material
50Mn/42CrMo4 ring, GCr15 rollers
HS code
8482.80.00

Data not listed in this table, such as limiting speed or tilting stiffness, is not stated on this page. Please ask our engineers if your design needs it.

Load Capacity and Preload

The XU120179 Crossed Roller Slewing Ring is rated at Ca 105 kN and C0a 194 kN axially, and Cr 75 kN and C0r 95 kN radially. From these values, the ratio of static to dynamic rating is about 1.85 axial and 1.27 radial. Load figures follow Schaeffler medias data.

The VSP preload of max 0.02 mm removes clearance, which supports positioning repeatability under reversing loads. If your application needs a different preload, contact our engineers to confirm what is possible.

XU120179 Crossed Roller Slewing Ring

Crossed Roller vs Four-Point Ball Rings

A four-point contact ball ring uses point contact. A crossed roller ring uses line contact with preload, which generally gives higher rigidity in a similar thin section. The final choice depends on your load case, space and positioning requirements, so compare both against your design data.

Applications

Typical uses for the product include:

· Machine tool rotary tables: A preloaded raceway for tables that see interrupted cutting forces. The 35 mm overall height helps keep table height low.

· Rotary indexing and automation: Chain, belt or friction wheel drives can be paired with the ring for repeatable indexing.

· Robot joints and reducers: A compact envelope for combined arm and payload loads.

· Measuring instruments: CMM rotary tables, optical inspection turntables and test fixtures that need low-speed positioning.

· Medical imaging equipment: A sealed, preloaded ring may be considered for rotating gantries or turntables. Confirm requirements with our engineers first.

· Special excavator: Welding positioners, rotary coating or filling machines, and antenna and sensor turntables.

XU120179 Crossed Roller Slewing Ring application

Drive, Mounting and Lubrication

The ring has no gear teeth, so it needs an external drive. Options include a chain, a belt, a friction wheel, direct motor coupling, or a pinion working with a separate toothed part.

Both rings have 12 × 11 mm through holes. The specification table lists a maximum screw load Fr zul of 33.6 kN.

Seals on both sides help keep contamination out. Grease enters through the nipple on the outer ring, which protrudes up to 6 mm, so reserve housing space for it. Keep operation between -30 and +80 °C.

Heng Guan staff can advise on installation, preload adjustment and lubrication.

About Heng Guan and Quality Control

Luoyang Heng Guan Bearing Technology Co., Ltd. has over 20 years of experience, a team of over 50 people, and ISO 9001:2015 certification. It exports to more than 50 countries, including the United States, Germany, Turkey and Australia. Engineering confirmation and after-sales replies are provided within 24 hours.

Quality control runs from raw material selection to finished product inspection, using coordinate measuring machines, vibration testers and life testing machines. Machining and heat treatment use CNC vertical lathes, CNC quenching machines, machining centers and grinding machines. Heng Guan states that its products meet RoHS and applicable DIN, ISO and GB standards. Request the documents for this model if you need them.

Supply, Replacement and Customization

XU120179 is listed as an interchange for INA XU120179 / XU 12 0179, and Heng Guan offers a replacement service for worn INA units. "INA" is a third-party trademark used for compatibility description only. Before ordering, check that the XU120179 Crossed Roller Slewing Ring matches your mounting dimensions, bolt circles and lubrication nipple clearance.

Need another size? Heng Guan also makes Slewing Bearings from 50 to 10,000 mm in P0 to P4. It offers non-standard machining, old product mapping without 3D drawings, and OEM/ODM cooperation. Orders start at MOQ 1 pc from the Luoyang factory.

XU120179 Crossed Roller Slewing Ring certification

FAQ

Q: What is XU120179?

A: The product is a gearless ring from the INA XU standard series, sealed on both sides and VSP-preloaded. It has a 124.5 mm bore, a 234 mm outside diameter and a 35 mm height.

Q: What is the load capacity of XU120179?

A: Axial rating Ca is 105 kN and static axial rating C0a is 194 kN. Radial rating Cr is 75 kN and static radial rating C0r is 95 kN.

Q: Is XU120179 preloaded?

A: Yes. The preload is VSP, max 0.02 mm, which means zero clearance.

Q: Is XU120179 sealed?

A: Yes. Both sides are sealed, and the outer ring has a lubrication nipple. Reserve room for its 6 mm protrusion.

Q: Is XU120179 interchangeable with INA bearings?

A: It is listed as an interchange for INA XU120179 / XU 12 0179. Compare the drawing and mounting dimensions before ordering.

Q: How is XU120179 driven?

A: The ring has no gear teeth, so the drive is external. Examples are a chain, a belt, a friction wheel, direct motor coupling, or a pinion working with a separate toothed part.

Contact Us

Email mia@hgb-bearing.com with your drawing or application details to request availability, a CAD drawing and a quote for the XU120179 Crossed Roller Slewing Ring. Minimum order is 1 piece.

GET IN TOUCH WITH OUR ENGINEERS
Tell us your requirements — drawings, size, or application