banner

XU080430 Crossed Roller Slewing Ring

XU080430 is a sealed, VSP-preloaded gearless crossed roller slewing ring from the INA XU standard series — an ultra-thin large-diameter precision bearing for low-profile turntables.
• Dimensions: Bore 380 mm (14.96 in), OD 480 mm (18.90 in), height 26 mm (1.02 in), weight 11.9 kg (26.3 lb)
• Load Ratings: Dynamic axial Ca = 96 kN, static axial C0a = 345 kN; dynamic radial Cr = 68 kN, static radial C0r = 168 kN
• Preload System: VSP 0.005-0.02 mm — zero clearance, no backlash with high tilting stiffness over a wide footprint
• Structure: Crossed roller X-arrangement (single row, gearless) — ultra-thin 26 mm section at large diameter, ideal where stack height is critical
• Mounting: 20 x 9 mm through holes with 15 x 9 mm countersink on 462 mm outer circle; 20 x M10 threaded holes on 398 mm inner circle (asymmetric — confirm bolt orientation per drawing)
• Sealing & Lubrication: Sealed both sides; grease lubrication; operating range -30 to +80 C
• Key Feature: Large-diameter (380 mm) low-profile design — 345 kN static axial capacity in only 26 mm section height
• Drive Method: External belt, chain, or friction wheel (no gear teeth)
• Interchange: Direct replacement for INA XU080430 / XU 08 0430
Send Inquiry Download
  • Product Description

XU080430 Crossed Roller Slewing Ring: Sealed, Preloaded Gearless Bearing for Low-Profile Turntables

Luoyang Heng Guan Bearing Technology Co., Ltd. in Luoyang, China supplies a sealed, gearless bearing: the XU080430 Crossed Roller Slewing Ring from the INA XU standard series. It has a 380 mm bore, a 480 mm outside diameter and a 26 mm total height, with VSP preload of 0.005–0.02 mm for zero clearance. It carries 345 kN static axial load and operates from -30 to +80 °C. The ring is offered in P0, P6 and P5 precision and suits low-profile turntables and indexing tables.

What Is XU080430?

XU080430 is a single-row, gearless crossed roller bearing from the INA XU standard series. Cylindrical rollers are arranged in an X pattern in a V-groove raceway, with spacers between them. This line contact allows one ring to support radial, axial and tilting moment loads at the same time, so a single ring can be considered where a design would otherwise use two bearings. Confirm suitability with your own load calculation.

XU080430 Crossed Roller Slewing Ring Specifications

Parameter
Value
Bearing type
Crossed roller (X-arrangement), single row, gearless
Bore diameter (di)
380 mm, tolerance +0.057/0
Outside diameter (Da)
480 mm, tolerance 0/-0.2
Total height (H)
26 mm
Inner diameter, outer ring (Di)
430.6 mm
Weight
11.925 kg
Axial load rating Ca (rating life)
96 kN
Static axial load C0a
345 kN
Radial load rating Cr
68 kN
Static radial load C0r
168 kN
Max. screw load (Fr zul)
35.0 kN
Preload
VSP 0.005–0.02 mm (zero clearance)
Seals / lubrication
Sealed both sides, grease
Outer bolt circle (La)
462 mm, 20 holes, Ø9 mm through, 15 × 9 mm countersink
Inner bolt circle (Li)
398 mm, 20 × M10 threaded
Roller diameter
8 mm class
Operating temperature
-30 to +80 °C
Precision
P0 / P6 / P5
Material
50Mn/42CrMo4 rings, GCr15 rollers
Interchange
INA XU080430 / XU 08 0430
HS code
8482.80.00

Parameters not shown in the table are not available in the current product data and can be confirmed on request. Check final dimensions and hole details against the drawing before ordering.

Load Capacity and Preload

The XU080430 Crossed Roller Slewing Ring has a listed static axial load rating (C0a) of 345 kN and a static radial load rating (C0r) of 168 kN within a 26 mm total height. The axial and radial load ratings (Ca and Cr) are 96 kN and 68 kN, and the figures follow the Schaeffler medias data for this reference.

VSP preload of 0.005–0.02 mm gives zero clearance. The listed maximum screw load (Fr zul) is 35.0 kN. Check the actual load case, mounting stiffness and screw selection before final selection.

Main Features

· Low profile: a 380 mm bore with a 26 mm total height.

· Preloaded: VSP preload of 0.005–0.02 mm, zero clearance.

· Sealed: sealed on both sides and supplied with grease.

· Combined loads: one ring supports radial, axial and tilting moment loads.

· Direct supply: ISO 9001-certified manufacturer, MOQ 1 pc.

XU080430 Crossed Roller Slewing Ring

Mounting and Drive Method

The mounting is asymmetric. The outer ring has 20 through holes of Ø9 mm with countersinks on a 462 mm bolt circle, and the inner ring has 20 M10 threaded holes on a 398 mm bolt circle. Check bolt orientation against the drawing before machining the mating flange.

The product has no gear teeth, so an external drive is required. Options include a belt, chain, friction wheel, a pinion on a customer gear ring or rack, or a hydraulic or electric motor coupled to the turntable. The listed operating temperature is -30 to +80 °C.

Applications

Suitability depends on load, speed, accuracy and environment. Typical uses include:

· Low-profile turntables and rotary stations: the 26 mm height keeps the platform thin.

· Indexing tables and automation: used with chain, belt or friction drive.

· Machine tool worktables: for rotary tables that combine axial, radial and moment loads.

· Robot and AGV/AMR platforms: large-diameter rotation with limited height.

· Medical and inspection equipment: for example CT gantry rings and inspection turntables, after application review.

· Special excavator: welding positioners, coating and filling machines, and antenna turntables.

XU080430 Crossed Roller Slewing Ring application

Materials, Precision and Quality Control

Rings are made of 50Mn or 42CrMo4 steel, and rollers are made of GCr15. P0, P6 and P5 precision grades are available.

Heng Guan works under an ISO 9001-certified system that covers material selection through finished-product inspection. Coordinate measuring machines check dimensions and hole positions, and vibration testers and life testing machines check running quality. The products are RoHS compliant. Ask Heng Guan which documents are available for your order.

XU080430 Crossed Roller Slewing Ring certification

Customization, Export and Support

Heng Guan has over 20 years of experience and a team of over 50 people. It makes Slewing Bearings from 50 mm to 10,000 mm in P0, P6, P5 and P4 precision. If your design differs from the XU080430 Crossed Roller Slewing Ring, the team offers non-standard machining, OEM/ODM cooperation and mapping of existing parts when no 3D drawing is available. CNC vertical lathes, CNC quenching machines, machining centers and grinding machines support machining and heat treatment.

Heng Guan has exported to more than 50 countries, including South Africa, the United States, Germany, the United Kingdom, Italy, Turkey, Russia, Australia, Mexico, Malaysia and the Middle East. Support covers bearing selection, installation guidance, preload adjustment, lubrication advice and a 24-hour response.

FAQ

Q: What is XU080430?

A: It is a sealed, VSP-preloaded crossed roller bearing without gear teeth, from the INA XU standard series. It has a 380 mm bore, a 480 mm outside diameter and a 26 mm total height, and weighs 11.925 kg.

Q: What are the load ratings of XU080430?

A: Ca is 96 kN, C0a is 345 kN, Cr is 68 kN and C0r is 168 kN, per Schaeffler medias data. The listed maximum screw load (Fr zul) is 35.0 kN.

Q: Is the product preloaded?

A: Yes. The listed VSP preload is 0.005–0.02 mm, which gives zero clearance.

Q: Is XU080430 interchangeable with INA bearings?

A: The specification lists INA XU080430 / XU 08 0430 as the interchange reference. Heng Guan is an independent manufacturer, and INA is a third-party trademark used only to identify the reference. Check dimensions and mounting details against your drawing before ordering.

Q: What is the difference between a crossed roller and a four-point contact ball slewing ring?

A: A crossed roller ring uses rollers in an X arrangement with line contact, while a four-point contact ball ring uses balls with point contact. The right choice depends on load, stiffness, available space and cost.

Q: Is XU080430 available?

A: Contact Heng Guan to check availability and request a CAD drawing. The MOQ is 1 pc, and engineering confirmation is given within 24 hours.

Contact Us

Send your drawing, load case and quantity to mia@hgb-bearing.com. Heng Guan will review your XU080430 Crossed Roller Slewing Ring requirements and reply with engineering confirmation within 24 hours.

GET IN TOUCH WITH OUR ENGINEERS
Tell us your requirements — drawings, size, or application