banner

XU080149 Crossed Roller Slewing Ring

XU080149 is a sealed, VSP-preloaded gearless crossed roller slewing ring from the INA XU standard series — an imperial-origin precision model with a 4-inch bore.
• Dimensions: Bore 4.000" (101.6 mm), OD 7.750" (196.85 mm), height 0.875" (22.22 mm), weight 3.28 kg (7.2 lb)
• Load Ratings: Dynamic axial Ca = 55 kN, static axial C0a = 77 kN; dynamic radial Cr = 39 kN, static radial C0r = 37.5 kN
• Preload System: VSP 0.005-0.02 mm — zero clearance, no backlash for precision indexing
• Structure: Crossed roller X-arrangement (single row, gearless) — line contact delivers higher rigidity than four-point ball designs
• Mounting: 16 x 6.9 mm through holes on 177.8 mm (7.00") outer / 115.8 mm (4.56") inner bolt circles
• Sealing & Lubrication: Sealed both sides; grease via nipple on outer ring; operating range -30 to +80 C
• Imperial Origin: Exact inch dimensions (4.000" x 7.750" x 0.875") — drop-in fit for inch-based machine frames without adapter plates
• Drive Method: External belt, chain, or friction wheel (no gear teeth)
• Interchange: Direct replacement for INA XU080149 / XU 08 0149
Send Inquiry Download
  • Product Description

XU080149 Crossed Roller Slewing Ring: 4-Inch Gearless Precision Bearing with VSP Preload

Luoyang Heng Guan Bearing Technology Co., Ltd. offers a sealed, gearless bearing in the INA XU series, the XU080149 Crossed Roller Slewing Ring, with VSP preload for clearance-free rotation. It has a 101.6 mm (4.000 in) bore, a 196.85 mm (7.750 in) outside diameter, a 22.22 mm (0.875 in) height and a weight of 3.28 kg. The listed axial load rating is 55 kN, the static axial rating is 77 kN, and the preload is 0.005–0.02 mm. Orders start at 1 piece, and engineering confirmation is provided within 24 hours.

XU080149 Crossed Roller Slewing Ring Overview

The product is an imperial-origin model with a 4.000 × 7.750 × 0.875 in envelope, which suits inch-based machine frames and housings. Check your housing and bolt pattern against the dimensions below before ordering.

A single row of 8 mm class cylindrical rollers runs in an X-arrangement. Seals on both sides are intended to retain grease and limit contamination. The ring is listed as interchangeable with INA XU080149 / XU 08 0149.

XU080149 Crossed Roller Slewing Ring Specifications

Parameter
Value
Bearing type
Crossed roller (X-arrangement), single row, gearless
Bore diameter (di)
101.6 mm (4.000 in), tolerance +0.013/0
Outside diameter (Da)
196.85 mm (7.750 in), tolerance 0/-0.046
Total height (H)
22.22 mm (0.875 in)
Weight
3.28 kg (7.2 lb)
Outer ring inner diameter (Di)
149.6 mm (5.89 in)
Outer bolt circle (La)
177.8 mm (7.00 in), 16 holes
Inner bolt circle (Li)
115.8 mm (4.56 in), 16 holes
Fixing bores
16 × 6.9 mm (0.27 in) through holes, counterbore 11 × 6.35 mm
Roller diameter
8 mm class
Preload
VSP 0.005–0.02 mm (zero clearance)
Seals
Both sides
Lubrication
Nipple on outer ring circumference
Operating temperature
-30 to +80 °C
Precision
P0 / P6 / P5
Material
50Mn/42CrMo4 rings, GCr15 rollers
Interchange
INA XU080149 / XU 08 0149
HS code
8482.80.00
Axial load rating Ca
55 kN (12,365 lbf)
Static axial load C0a
77 kN (17,310 lbf)
Radial load rating Cr
39 kN (8,768 lbf)
Static radial load C0r
37.5 kN (8,430 lbf)
Max radial load on fixing screws (Fr zul)
15.4 kN (3,462 lbf)

Metric values follow the current INA data sheet for XU080149; imperial equivalents are rounded for convenience, and tolerances are stated in millimetres. Any parameter not listed here was not supplied and is not stated. Contact Us if you need additional data.

Structure and Materials

In the XU080149 Crossed Roller Slewing Ring, cylindrical rollers cross at 90° in a V-groove raceway, with spacers between the rollers to limit skewing and friction. This layout lets one slim ring carry radial, axial and moment loads.

The rings are listed as 50Mn/42CrMo4 steel with GCr15 rollers. Available precision grades are P0, P6 and P5. The VSP preload of 0.005–0.02 mm removes internal clearance, which matters on axes where reversing loads affect positioning repeatability.

XU080149 Crossed Roller Slewing Ring

Mounting, Sealing and Drive Options

Both the inner and outer rings carry 16 fixing holes. Each has a 6.9 mm through hole with an 11 × 6.35 mm counterbore. Grease is added through the nipple on the outer ring circumference, and the listed operating range is -30 to +80 °C.

The ring has no gear teeth, so it needs an external drive. Options include a pinion on a gear ring or rack, a chain, a belt, a friction wheel, or a hydraulic or electric motor coupled to the turntable.

Typical Applications

Suitability depends on load, speed, accuracy and mounting design, so confirm your case with our engineers. Crossed roller slewing rings of this type are commonly considered for:

· Machine tool rotary tables: the 4.000 in bore suits inch-based spindle designs.

· Measuring and inspection equipment: rotary tables and turntables that need low-speed, clearance-free positioning.

· Medical imaging gantries: applications where the 22.22 mm (0.875 in) overall height keeps the axial stack short.

· Robotic joints and rotary actuators: compact joints that carry combined loads.

· Indexing tables and automation lines: chain, belt or friction wheel drives with repeatable positioning.

· Test and handling equipment: turntables that need smooth, controlled rotation.

XU080149 Crossed Roller Slewing Ring applicatoin

Quality and Testing

Heng Guan operates an ISO 9001-certified quality system. The company lists coordinate measuring machines, vibration testers and life testing machines among its inspection equipment. Contact us to confirm which inspection records are available for your order.

XU080149 Crossed Roller Slewing Ring certification

Why Buy from Heng Guan

Heng Guan supplies the XU080149 Crossed Roller Slewing Ring factory-direct from Luoyang, China. The company has more than 20 years of experience, a team of more than 50 people, and exports to more than 50 countries.

If you need a variant, old-product mapping and non-standard customization are available, including without 3D drawings. OEM/ODM cooperation is also possible. Support covers bearing selection, installation, preload adjustment and lubrication, and after-sales inquiries receive a response within 24 hours.

For a faster quote, send your application, required quantity, load and speed conditions, and housing drawing.

FAQ

Q: What is XU080149?

A: The product is a gearless crossed roller bearing from the INA XU series, sealed on both sides and VSP-preloaded. Its bore is 101.6 mm, its outside diameter is 196.85 mm, its height is 22.22 mm, and its weight is 3.28 kg.

Q: What are the dimensions of XU080149 in inches?

A: The bore is 4.000 in, the outside diameter is 7.750 in, the height is 0.875 in, and the weight is 7.2 lb. It has 16 holes on a 7.00 in outer bolt circle and 16 holes on a 4.56 in inner bolt circle.

Q: Is XU080149 preloaded?

A: Yes. The listed VSP preload is 0.005–0.02 mm, described as zero clearance.

Q: How does a crossed roller ring differ from a four-point contact ball slewing ring?

A: A crossed roller ring uses cylindrical rollers with line contact and is preloaded, which generally gives higher rigidity in a thinner section. A four-point contact ball ring uses point contact. The right choice depends on your load, rigidity and space requirements.

Q: Is XU080149 interchangeable with INA bearings?

A: It is listed as interchangeable with INA XU080149 / XU 08 0149. Confirm the dimensions and mounting pattern against your drawing before replacing an existing unit. INA is a third-party trademark used here for compatibility reference only.

Q: Is XU080149 in stock?

A: Contact us for current availability, CAD drawings and factory-direct pricing. The MOQ is 1 piece, and engineering confirmation is provided within 24 hours.

Contact Us

Email mia@hgb-bearing.com for availability, CAD drawings and factory-direct pricing on the XU080149 Crossed Roller Slewing Ring. Engineering confirmation follows within 24 hours.

GET IN TOUCH WITH OUR ENGINEERS
Tell us your requirements — drawings, size, or application