XU060111-A Crossed Roller Slewing Ring
• Dimensions: Bore exactly 3.000" (76.2 mm), OD 5.740" (145.79 mm), height 0.625" (15.87 mm), weight 1.2 kg (2.6 lb)
• Load Ratings: Dynamic axial Ca = 31.5 kN, static axial C0a = 57 kN; dynamic radial Cr = 22.5 kN, static radial C0r = 28 kN
• Preload System: VSP 0.005-0.02 mm — zero clearance, no backlash for repeatable positioning
• Structure: Crossed roller X-arrangement (single row, gearless) — 15.87 mm thin section, the slimmest in the XU family
• -A Suffix Feature: Recess turned in the inner ring (101 mm / 3.976" per official Schaeffler data) — a locating/lightening feature for slim housing designs, unique in the XU family
• Mounting: 8 x 6.9 mm counterbored through holes on 133.1 mm outer / 88.9 mm inner bolt circles (no threaded holes); centring land t = 9.15 mm
• Sealing & Lubrication: Lip seals both sides (NBR); grease via nipple on outer ring; operating range -30 to +80 C
• Imperial Origin: Exact inch dimensions (3.000" x 5.740" x 0.625") — drop-in fit for inch-based designs without adapter plates
• Drive Method: External belt, chain, or friction wheel (no gear teeth)
• Interchange: Direct replacement for INA XU060111-A / XU 06 0111
- Product Description
XU060111-A Crossed Roller Slewing Ring: 3-Inch Gearless Imperial Bearing
Designed for compact rotary tables, measuring stages and robot joints that need an imperial bearing, the XU060111-A Crossed Roller Slewing Ring is a sealed, gearless, single-row crossed roller bearing with a 76.2 mm (3.000 in) bore, 145.79 mm outside diameter and 15.87 mm height. It weighs 1.2 kg and uses VSP preload of 0.005–0.02 mm. Luoyang Heng Guan Bearing Technology Co., Ltd. supplies it in P0, P6 and P5 precision grades with a minimum order of one piece, and it matches the INA reference XU 06 0111.
Key Features
· Imperial dimensions: 3.000 in bore, 5.740 in outside diameter and 0.625 in height, for designs drawn in inches.
· Low profile: 15.87 mm overall height and 1.2 kg weight for compact mechanisms.
· Preloaded design: VSP preload of 0.005–0.02 mm, with NBR lip seals on both sides.
XU060111-A Crossed Roller Slewing Ring Specifications
Parameter | Value |
Bearing type | Crossed roller, X-arrangement, single row, gearless |
Bore diameter (di) | 76.2 mm (3.000 in) |
Outside diameter (Da) | 145.79 mm (5.740 in) |
Total height (H) | 15.87 mm (0.625 in) |
Weight | 1.2 kg (2.6 lb) |
Inner ring recess (-A) | 101 mm (3.976 in) |
Outer bolt circle (La) | 133.1 mm, 8 holes |
Inner bolt circle (Li) | 88.9 mm, 8 holes |
Fixing bores | 8 × 6.9 mm counterbored through holes (11 × 6.35 mm counterbore), no threads |
Centring land (t) | 9.15 mm |
Preload | VSP 0.005–0.02 mm |
Seals | NBR lip seals, both sides |
Lubrication | Grease via nipple on outer ring |
Operating temperature | -30 to +80 °C |
Precision | P0, P6, P5 |
Material | 50Mn/42CrMo4 ring, GCr15 rollers |
Interchange | INA XU060111-A / XU 06 0111 |
HS code | 8482.80.00 |
--- | --- |
Axial load rating Ca | 31.5 kN |
Static axial load C0a | 57.0 kN |
Radial load rating Cr | 22.5 kN |
Static radial load C0r | 28.0 kN |
Max. screw load (Fr zul) | 7.6 kN |
Parameters that are not listed in these tables are not stated on this page. Please Contact Us to confirm any other data before ordering.
Mounting and the -A Recess
The -A suffix refers to the 101 mm (3.976 in) recess in the inner ring. When you design around the XU060111-A Crossed Roller Slewing Ring, check this recess against your housing and locating features.
Both rings are fixed with counterbored through holes: eight on the 133.1 mm outer circle and eight on the 88.9 mm inner circle. No hole is threaded. Each is a Ø6.9 clearance hole with a Ø11 counterbore 6.35 mm deep, so socket head screws seat in the counterbore and thread into the mating part — the housing on the outer ring, the Shaft flange on the inner ring — which means both mating parts must be tapped. The centring length is 9.15 mm, and the maximum radial load the screw connection can transmit is 7.6 kN.

Construction, Sealing and Lubrication
In a crossed roller design, cylindrical rollers sit alternately at right angles in the raceway, so a single ring can carry radial, axial and moment loads. This bearing is single row and gearless, with a 50Mn/42CrMo4 ring and GCr15 rollers.
NBR lip seals close both sides. Grease is applied through a nipple on the outer ring, and the listed operating temperature is -30 to +80 °C. Because the bearing has no gear teeth, it is driven externally, for example with a belt, chain or friction wheel.
Applications
The XU060111-A Crossed Roller Slewing Ring is intended for compact rotating axes where height and weight are limited. Confirm load, speed and accuracy requirements against the data above.
· Rotary tables and tilting axes: small machine-tool or fixture tables that need a thin preloaded bearing.
· Measuring and inspection equipment: rotary stages and test fixtures.
· Robotic joints and compact actuators: light arms and rotary modules.
· Indexing stations: belt, chain or friction-wheel driven positioning.
· Imaging and optical equipment: turntables and alignment stages with limited space.

Company, Quality and Support
Luoyang Heng Guan Bearing Technology Co., Ltd. operates under an ISO 9001:2015 certified quality system. The company reports over 20 years of bearing experience and exports to more than 50 countries.
Heng Guan offers OEM/ODM cooperation, non-standard machining and mapping of old products without 3D drawings. Buyers can request a quotation for the product, along with technical consultation and installation guidance. Quantity, precision grade and application details help speed up the review.

FAQ
Q: What does the -A suffix mean?
A: It refers to the 101 mm (3.976 in) recess in the inner ring. Check this feature against your housing design.
Q: Is the bearing preloaded?
A: Yes. The listed preload is VSP 0.005–0.02 mm.
Q: Does the bearing have threaded holes?
A: No. It has 8 counterbored through holes on each bolt circle, with no threads.
Q: How is a gearless crossed roller bearing driven?
A: It is driven externally, for example by a belt, chain or friction wheel.
Q: What is the difference between a crossed roller bearing and a four-point contact ball slewing ring?
A: A crossed roller bearing uses cylindrical rollers with line contact, while a four-point ball ring uses point contact. The right choice depends on the load, stiffness and space limits of your design.
Q: Does XU060111-A match INA references?
A: It is listed as interchangeable with INA XU060111-A / XU 06 0111. INA is a third-party trademark used here only to describe compatibility. Contact us to confirm availability, drawings and pricing.
Contact Us
Do you have more questions about XU060111-A Crossed Roller Slewing Ring? Email mia@hgb-bearing.com with your quantity, precision grade and application to request availability, CAD drawings or a quotation for this bearing.




