XU060094 Crossed Roller Slewing Ring
• Dimensions: Bore 57 mm (2.24 in), OD 140 mm (5.51 in), height 26 mm, weight 2.22 kg (4.9 lb)
• Load Ratings: Dynamic axial Ca = 30 kN, static axial C0a = 49.5 kN; dynamic radial Cr = 21.6 kN, static radial C0r = 24.4 kN
• Preload System: VSP 0.005-0.008 mm — the tightest preload in the XU family, ensuring zero clearance and no backlash
• Structure: Crossed roller X-arrangement (single row, gearless) — carries axial, radial, and tilting moment loads simultaneously with line-contact rigidity superior to four-point ball designs
• Mounting: 6 x M8 threaded holes + 6 x 9 mm counterbored holes on 120 mm outer / 70 mm inner bolt circles; centring land t = 10 mm
• Sealing & Lubrication: Lip seals both sides (NBR); grease via nipple on outer ring; operating range -30 to +80 C
• Variant: XU060094-RR with Corrotect corrosion coating available for cleanroom and humid environments
• Drive Method: External belt, chain, or friction wheel (no gear teeth)
• Interchange: Direct replacement for INA XU060094 / XU 06 0094 / legacy XU 050077
- Product Description
XU060094 Crossed Roller Slewing Ring: Sealed Gearless Bearing with VSP Preload
For rotary tables and indexing axes that need a compact, sealed bearing, Heng Guan Bearing supplies the XU060094 Crossed Roller Slewing Ring, a gearless, single-row bearing with NBR lip seals on both sides, from Luoyang, China. It measures 57 mm in bore, 140 mm in outside diameter and 26 mm in height, and weighs 2.22 kg. The VSP preload is 0.005–0.008 mm, and the axial load rating (Ca) is 30.0 kN with a static axial rating (C0a) of 49.5 kN. MOQ is 1 pc, with engineering confirmation within 24 h.
XU060094 Crossed Roller Slewing Ring Specifications
The table lists the parameters provided for the product. Please check them against your drawing before ordering.
Parameter | Value |
Bearing type | Crossed roller (X-arrangement), single row, gearless |
Bore diameter (di) | 57 mm (2.244 in), tolerance +0.025/0 |
Outside diameter (Da) | 140 mm (5.512 in), tolerance 0/-0.04 |
Total height (H) | 26 mm (1.024 in) |
Weight | 2.22 kg (4.9 lb) |
Axial load rating (Ca) | 30.0 kN (6,700 lbf) |
Static axial load (C0a) | 49.5 kN (11,100 lbf) |
Radial load rating (Cr) | 21.6 kN (4,850 lbf) |
Static radial load (C0r) | 24.4 kN (5,480 lbf) |
Max screw load (Fr zul) | 9.2 kN (2,070 lbf) |
Preload | VSP 0.005–0.008 mm |
Seals | NBR lip seals, both sides |
Lubrication | Grease via nipple on outer ring |
Outer bolt circle (La) | 120 mm / 6 holes |
Inner bolt circle (Li) | 70 mm / 6 holes |
Fixing bores | Outer ring: 6 × Ø9 through holes with Ø15 counterbore, 6 mm deep. Inner ring: 6 × M8 tapped, 13 mm deep. |
Centring land (t) | 10 mm |
Roller diameter | 8 mm |
Operating temperature | -30 to +80 °C |
Variant | XU060094-RR (Corrotect coating) |
Precision | P0 / P6 / P5 |
Material | 50Mn/42CrMo4 ring, GCr15 rollers |
HS code | 8482.80.00 (confirmed with our customs broker at order stage) |
Values are shown as given in the product data. Items not listed, such as hardness, grease type, relubrication interval, friction torque and tilting moment rating, are not specified here. Please ask us to confirm any missing data before you finalize your design.
Load Capacity and Preload
The listed axial ratings are Ca 30.0 kN and C0a 49.5 kN. The radial ratings are Cr 21.6 kN and C0r 24.4 kN. The table also gives a maximum screw load (Fr zul) of 9.2 kN, which should be checked against your mounting design.
The VSP preload of 0.005–0.008 mm is intended to remove running clearance. Preloaded crossed roller rings are generally chosen where reversing loads and positioning repeatability matter. Compare the ratings with your own load case and safety factor before selecting the ring.
Structure and Materials
The XU060094 Crossed Roller Slewing Ring uses 8 mm rollers arranged crosswise in a single row. Because the rollers make line contact, one ring can carry axial load, radial load and tilting moment at the same time. In a 26 mm section, this can replace a two-bearing arrangement in some designs.
The listed materials are 50Mn/42CrMo4 for the ring and GCr15 for the rollers. Precision grades are listed as P0 / P6 / P5.

Mounting, Drive and Lubrication
The outer ring has a 120 mm bolt circle with six Ø9 through holes, each with a Ø15 counterbore 6 mm deep, so M8 screws pass through the ring and thread into the housing. The inner ring has a 70 mm bolt circle with six M8 tapped holes, 13 mm deep. The 10 mm centring length (t) on the inner ring locates the bearing in its seat.
The ring has no gear teeth, so it must be driven externally, for example by a belt, chain or friction wheel. The best choice depends on your design.
NBR lip seals on both sides help keep contaminants out. Grease is added through the nipple on the outer ring, and the listed operating temperature is -30 to +80 °C.
Key Features
· Preload: VSP 0.005–0.008 mm.
· Crossed roller layout: one ring carries combined axial, radial and moment loads.
· Sealing: NBR lip seals on both sides.
· Coated variant: XU060094-RR with Corrotect coating for added corrosion protection. Please confirm its dimensions and ratings when ordering.
· Interchange: dimensionally equivalent to INA XU060094 at 57×140×26 mm.Ordering: MOQ is 1 pc.
Typical Applications
Crossed roller rings of this type are commonly used in:
· Rotary tables and tilting axes on machine tools
· Measuring and inspection rotary tables
· Robotic joints and precision actuators, where the 2.22 kg weight helps keep the joint light
· Belt-, chain- or friction-wheel-driven indexing stations
Please Contact Us to confirm suitability for your specific load, speed and environment.

Quality Control
Luoyang Heng Guan Bearing Technology Co., Ltd. has over 20 years of experience, a team of more than 50 people and an ISO 9001:2015 quality system. Coordinate measuring machines check bores, diameters, heights and hole positions. Vibration testers and life testing machines support accuracy and durability checks. Machining and heat treatment are done on CNC lathes, quenching machines, gear shaping machines, machining centers and grinding machines. Please ask which inspection documents are available for your order.
Customization and Support
Heng Guan Bearing offers OEM/ODM cooperation and non-standard machining, and its Slewing Bearings range from 50 to 10,000 mm in diameter. Help with matching older part numbers is available even without 3D drawings. Technical consultation, bearing selection, installation guidance, preload adjustment and lubrication advice are also available.
For the XU060094 Crossed Roller Slewing Ring, one contact can handle your questions from selection onward. To speed up a quote, send the part number, quantity, application and any existing drawing. After-sales inquiries receive a response within 24 hours. Products ship to more than 50 countries, including the United States, Germany, the United Kingdom, Italy, Australia and Mexico.

FAQ
Q: Is XU060094 preloaded?
A: Yes. The listed VSP preload is 0.005–0.008 mm.
Q: What does XU060094-RR mean?
A: The table lists XU060094-RR as a variant with Corrotect coating. Please confirm its dimensions, ratings and lead time with us before ordering.
Q: How does XU050077 differ from XU060094?
A: XU050077 is the next smaller size in the same series: 40 mm bore, 112 mm outside diameter, 22 mm height, about 1.2 kg, with La 97 mm and Li 56 mm. XU060094 is 57×140×26 mm and about 2.2 kg. The two are not interchangeable.
Q: How is a gearless crossed roller ring driven?
A: It is driven externally, for example by a belt, chain or friction wheel. The right choice depends on your design.
Q: What is the difference between a crossed roller ring and a four-point contact ball ring?
A: A crossed roller ring uses cylindrical rollers with line contact, while a four-point contact ball ring uses ball contact. Crossed roller designs are generally chosen for rigidity in a compact section. Compare load ratings and installation space for your own application.
Q: Is the product in stock?
A: Contact us for availability, CAD drawings and factory-direct pricing. MOQ is 1 pc, with engineering confirmation within 24 h.
Contact Us
Email mia@hgb-bearing.com for CAD drawings, availability and pricing for the XU060094 Crossed Roller Slewing Ring. Engineering confirmation is given within 24 hours.




